论文标题
界面对PP/机械性能的物理影响是由甲基酸酐引起的修饰聚合物
Interface Physical Influence on Mechanic Properties of PP/AS Modified Polymer Caused by Maleic Anhydride
论文作者
论文摘要
聚丙烯（PP）是一种广泛使用的聚合物物质，具有许多优点，例如丰富的来源，简单的合成过程，小密度，低成本，易于加工和成型。目前，在聚丙烯改良的混合过程中，包括PP/ABS系统，PP/SBS系统等的研究取得了很大的进步。但是，对PP/混合的研究相对较少，实验公式范围很大，因此很难确定最佳比率。根据先前的实验，这项研究进一步缩小了比例范围。通过AS修饰PP，讨论了马来酸酐添加对混合机械性能的界面物理效应，并发现最佳比例获得了具有显着改善的机械性能的改良PP树脂。
Polypropylene (PP) is a widely used polymer matter, which has many advantages, such as rich sources, simple synthesis process, small density, low cost, easy processing and molding. At present, there has been a lot of progress in the research of polypropylene modified blending, including PP/ABS system, PP/SBS system, etc. However, the research on PP/AS blend is relatively few, and the experimental formula range is large, so it is difficult to determine the optimal ratio. On the basis of previous experiments, this study further narrowed the proportion range. Through AS modifying PP, the interface physical effect of maleic anhydride addition on the mechanical properties of the blend was discussed, and the optimal proportion was found to obtain the modified PP resin with significantly improved mechanical properties.
